Tips On How To Deal With A Plumbing Problem

PR5 General Web DirectoryArticle Details

Tips On How To Deal With A Plumbing Problem

Date Added: July 03, 2014 01:56:11 AM

Panic is the first emotion that most people feel when they have plumbing issues. This is a perfectly normal emotion. But, you do not have to feel this way if you have the proper plumbing education. This article is going to be giving you the plumbing education you need to help you fix your problem. You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action. Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected. If your pipes are prone to freezing, let the water trickle continuously in at least one faucet during weather that is below freezing. This will minimize the chances that the pipes will freeze and leave you without water. If water is continually running through the pipes and trickling out of a faucet, the pipes are Brandon Plumber less likely to freeze. If you have noisy pipes, you can cushion them with a rubber blanket or add additional anchor straps. Banging pipes are usually caused by loose pipes, water hammering to a stop as you turn it off, or hot water pipes shifting in their position. All of these problems can be solved by cushioning and anchoring the pipes. To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap. Don't start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother! Prevention will save you money in plumbing bills. The repairs that plumbers perform the most are for drains that are clogged. One major thing that causes clots is grease. It builds up over and time. You can help prevent grease build up by looking for a product on the market that will clean the grease out. Make sure that your tool box is ready for any project you are preparing to do. The last thing you want is to be knee deep in a job only to find that you are missing the one tool you need to finish. Be sure to have various sizes of pipe wrenches that can be used to complete any job. Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you'll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water. To protect your money from unsavory plumbers, always get a written estimate before paying a cent or committing to a project. Good businessmen know to under-promise and over-deliver to savvy customers. Once a stated number is given, it is highly unlikely that your plumber will exceed the projected costs of the project. While it is possible to do plumbing activities yourself, it is generally not recommended. If you are not sure of what you are doing, then you must hire a professional. This will help to insure you don't make a bigger mess of the small problem that your plumbing previously had. If you are having any kind of problems with your water line or plumbing in general then you will first want to cut of your water supply. One of the most common mistakes that people make is to leave their water running while they are trying to fix things and this leads to bigger problems. Make sure you shut off your main system before leaving your house for a few weeks. The water will stay in the pipes, but this should prevent any further damages in case a leak starts while you are away. Check that your shut-off valve is working properly before you leave. For people who live in an apartment complex, plumbing is often forgotten about. The first time they move into a home they are unable to resolve any minor plumbing problems, because they have never dealt with this kind of thing. It is good to get a basic understanding when moving into your first house. If the water pressure on your street exceeds 60 pounds, you many want to consider installing a pressure reducing valve.